cargando por favor espere
Restablecer la contraseña / Crear una cuenta
ventas@bmppartes.com
64 resultados encontrados
Cantidad máxima permitida: 5000
Descripcion: Synthetic Supercharger Oil - 4 oz
Marca: AC DELCO
Contenido: 4 OZ
Caja: 12
Especificaciones / Aprobación: ACDelco Supercharger Oil is a high quality fluid that is used to help keep supercharger bearings operating properly. It is for use with all supercharged vehicles.
En stock
Consultar stock adicional
Descripcion: SCHNELL PENETRANTE
Marca: LIQUI MOLY
Contenido: 1
Caja: 1
Descripcion: Diesel Particulate Filter Protector
Contenido: 250 ML
Caja: 6
Especificaciones / Aprobación: Reduces formation of soot during combustion in the engine. Improves engine performance and emissions control. Reduces clogging of the DPF caused by soot as a combustion product. Added to diesel fuel for all diesel engines with DPF, particularly in modern high pressure engines in passenger and commercial motor vehicles, tractors, construction machinery and stationary engines. Ideally suitable for short distance or short time operation. Suitable for use with HVO / XTL Diesel fuel. Contents (250 ml) is sufficient for 50–75 Liters (13 gal. to 20 gal.) fuel. Application Contents (250 ml) is sufficient for 50–75 Liters (13 gal. to 20 gal.) fuel. For best results and long-term effect add DPF protector exery 2,000 km (1,200 miles).
Llame para verificar disponibilidad
Descripcion: Active-2C A/C System Cleaner
Contenido: 5 L
Especificaciones / Aprobación: Active-2C A/C System Cleaner. Aspecial Liqui Moly developed cleaning fluid consisting of 2 components that are mixed together for activation immediately before use. The mixture is used to clean and eliminate unpleasant odors from air conditioning systems in cars, commercial vehicles, buses or homes without the need for dismantling. After completed cleaning it leaves behind a pleasant fresh fragrance. For best results use only with Liqui Moly Air-Conditioner System Cleaner Gun (part no. 4090). For professional use only.
Descripcion: Cera Tec
Contenido: 300 ML
Especificaciones / Aprobación: High-tech anti-wear additive, suitable for most 4-stroke engines as well as manual transmissions and compressors. Reduces friction and wear thanks to a unique combination of ceramic compounds and chemical anti-wear agents. It will prevent direct metal-to-metal contact and reduce friction to increase engine life and efficiency in gasoline and diesel engines. Use in 4-stroke gasoline and diesel engines, with or without turbochargers. Miscible with most commercially available motor oils. Safe with catalytic converters and particulate filters (GPF/DPF) as well as for belt-in-oil systems. One full can (300 ml) used with 3–5 Liters (3.2 to 5.3 U.S. Qts) of motor oil. Long-term effect up to 50,000 km (30,000 miles). Shake well before use. Not suitable for use with DSG/DCT-, automatic-transmissions or wet-clutch differentials. Application: One full can (300 ml) used with 3–5 Liters (3.2 to 5.3 U.S. Qts) of motor oil. Long-term effect up to 50,000 km (30,000 miles). Shake well before use. Not suitable for use with DSG/DCT-, automatic-transmissions or wet-clutch differentials. For best protection, use with every oil change. Other information: Not suitable for use with wet clutches!
Descripcion: Hydraulic Lifter Additive
Especificaciones / Aprobación: Prevents and reduces hydraulic lifter noise. Cleans oil passages to remove oil flow restrictions. Restores proper hydraulic lifter function and reduces wear. For all 4-stroke gasoline and diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF/DPF). Compatible with most commercially available motor oils and belt-in-oil systems. One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. Not suitable for motorcycles with wet clutches. Application: One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. The product is self-mixing and can be added at any time. Shake well before use. For best results, use with every oil change. Other information: Not suitable for use on motorbikes with wet clutches.
Descripcion: Valve Clean
Contenido: 150 ML
Especificaciones / Aprobación: A combination of active agents, specifically developed to clean and maintain intake valves and the combustion chamber of port- and multi-port fuel injected engines. Restores engine efficiency and protects against corrosion in the fuel system. Suitable for use in all 4-stroke gasoline engines with port- and multi-port fuel injection, with or w/o turbochargers. Safe for use with catalytic converters and particulate filters (GPF). One full can (150 ml) used with 25–75 Liters (7 gal. to 20 gal.) of fuel. Application. For best results, use Valve Clean regularly. One full can (150 ml) used with 25–75 Liters (7 gal. to 20 gal.) of fuel.
Descripcion: Super Diesel Additive
Especificaciones / Aprobación: A combination of additives to clean and maintain the diesel fuel system. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions. Regular use keeps the fuel system in perfect working order. Suitable for use in all diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (DPF). Suitable for use with HVO / XTL Diesel fuel. For best results add Super Diesel Additive every 2,000 km (1,200 miles) to fuel. Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. Application: For best results and long-term effect add Super Diesel Additive every 2,000 km (1,200 miles). Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel.
Descripcion: Long-Life Grease + MoS2
Contenido: 100 G
Especificaciones / Aprobación: A high-performance grease suitable for a wide range of applications in all motor vehicles and for general machine lubrication. Thanks to added MoS2 it provides excellent protection during extreme loads and high heat while providing excellent dry-run properties. Designed as a CV-joint lubricant it's also recommended for high-load bearings and joints, splined shafts, threads, guides, and constant velocity drive joints. The added MoS2 gives the grease its grey color. Suitable for a wide application range in all motor vehicles and for general machine lubrication. Not suitable for high speed bearings such as wheel bearings. Application: As usual for grease. Observe the instructions of the bearing and machine manufacturers!
Descripcion: ATF Additive
Especificaciones / Aprobación: Keeps rubber and plastic seals in automatic transmissions soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow while restoring the oils performance. Reduces noise and improves shift performance in automatic transmissions. Extends usable transmission life. For all automatic transmissions that are filled with Dexron II and Dexron III based fluids. One full tube (250 ml) used with 4–8 Liters (4.2 to 8.5 U.S. Qts) of ATF fluid. Application: Mix ATF Additive into the gear oil using the dipstick. One full tube (250 ml) used with 4–8 Liters (4.2 to 8.5 U.S. Qts) of ATF fluid.
Descripcion: Diesel Purge
Contenido: 500 ML
Especificaciones / Aprobación: Developed for cleaning fuel systems and injectors within minutes and restore lost power caused by deposits. Ideally Diesel Purge is added into the fuel filter housing. It will eliminate knocking, pinging and exhaust smoke. Improves start up performance. Suitable for use in all diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (DPF). Suitable for use with HVO / XTL Diesel fuel. Preventive use: Fill the fuel filter up with Diesel Purge when doing filter replacement, put the rest in tank. In case of problems run the engine directly with Diesel Purge through fuel line or diesel filter. Application: Preventive use Fill the fuel filter up with Diesel Purge when doing filter replacement, put the rest in tank. Remedial use Unclip the fuel pipe and immerse the end in the Diesel Purge. Close the fuel return pipe or feed that into the Diesel Purge. Start the engine and allow the engine to run at different speeds with the Diesel Purge unmixed. After the cleaning process, assemble the vehicle's system. In extreme cases, repeat the cleaning procedure if necessary.
Descripcion: Jectron Fuel Injection Cleaner
Especificaciones / Aprobación: A combination of additives to clean and maintain the fuel system of port injected and carbureted gasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine efficiency. Regular use keeps the fuel system in perfect working order. Suitable for use in all 4-stroke gasoline engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF). Add the contents to the fuel tank and repeat every 2,000 km (1,200 miles) or as necessary. Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. Application: Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. Regular use keeps injection system in perfect working order and gives lowest exhaust emissions. Smoother idling, better throttle response. Injection Cleaner can be mixed with fuel at any time since mixing is spontaneous.
Descripcion: MoS2 Anti-Friction Engine Treatment
Especificaciones / Aprobación: MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine life and less noise. Specifically designed for older engine designs with or without a turbocharger. For all 4-stroke gasoline and diesel engines, with or w/o turbochargers. Compatible with most commercially available motor oils and in oil running belt. Safe for use with catalytic converters and particulate filters (GPF/DPF). One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. Shake well before use. Application: One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. The product is self-mixing and can be added at any time. Shake well before use. For best protection, use with every oil change.
Descripcion: Pro-Line Diesel Particulate Filter Cleaner
Contenido: 1 L
Descripcion: Pro-Line Diesel Particulate Filter Purge
No se encontraron piezas coincidentes.
Por favor, ajuste su búsqueda O borre los filtros.
