LUBRICANTES Y ADITIVOS

Descripcion: Power Steering Oil Leak Stop

Marca: LIQUI MOLY

Contenido: 35 ML

Caja: 12

Especificaciones / Aprobación: Keeps rubber and plastic seals in hydraulic power steering systems soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow, reduces noise levels and extends service life while reducing repair costs. Suitable for steering gears that are filled with Dexron II, Dexron III, Dexron VI or central hydraulic system oils. Add to the compensating reservoir of the steering system. One full tube (35 ml) used with up to 1 liter (1.1 U.S. Qts) of steering fluid. Appli­ca­tion: Add to the compensating reservoir of the steering system. One full tube (35 ml) used with up to 1 liter (1.1 U.S. Qts) of steering fluid.

Descripcion: Hybrid Additive

Marca: LIQUI MOLY

Contenido: 250 ML

Caja: 6

Especificaciones / Aprobación: A combination of agents, developed specifically for late model hybrid engines. Removes deposits in the fuel system and protects against corrosion. Stabilizes the fuel and protects against aging and oxidation. Diminished fuel degradation allows better engine performance and efficiency. Suitable for use in all 4-stroke gasoline engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF). To be added directly into the fuel tank. Contents (250 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) gasoline (dosage 1:300). Appli­ca­tion: Add the additive directly to the tank. Contents (250 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) gasoline (dosage 1:300).

Descripcion: Elec­tronic Spray

Marca: LIQUI MOLY

Contenido: 200 ML

Caja: 6

Especificaciones / Aprobación: Fully synthetic, silicone free contact spray, formulated for use on vehicle electronic and general electrical systems. Reduces fretting and corrosion, suppresses moisture. It is neutral to paints, common plastics and rubber. Cleans and protects electrical connectors. Suitable for use on vehicle electronic and general electrical systems. Appli­ca­tion: Spray components before installing them. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush. Note: After spraying on, allow a flash-off period of 10 min. before connecting the component to a power supply.

Descripcion: Pro-Line Gasoline System Cleaner

Marca: LIQUI MOLY

Contenido: 500 ML

Caja: 6

Especificaciones / Aprobación: An effective mixture of additives used to clean and maintain fuel systems of injected or carbureted gasoline engines.Cleans injectors and the combustion chamber, restores proper fuel atomization and improves engine efficiency. Suitable for use as problem solver and for preventive maintenance. Suitable for use in all 4-stroke gasoline engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF). One full Can (500 ml) used with 30 - 70 liters (8 gal. to 18 gal.) of fuel. Appli­ca­tion: Fill directly into the fuel tank. For preventive use at every inspection / once a year, for existing fuel system problems and after fuel system repairs. The product mixes automatically with the fuel and can therefore be added at any time. One full Can (500 ml) used with 30 - 70 liters (8 gal. to 18 gal.) of fuel.

Descripcion: Pro-Line Diesel System Cleaner

Marca: LIQUI MOLY

Contenido: 500 ML

Caja: 6

Especificaciones / Aprobación: A highly effective mixture of additives with strong cleaning power for rapid removal of deposits from the fuel system in all kinds of diesel engines. Cleans injectors and the combustion chamber. Restores engine efficiency and improves emission values. Suitable for use as a problem solver and for preventive maintenance. Suitable for use in all diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (DPF). Suitable for use with HVO / XTL Diesel fuel. One full Can (500 ml) used with 30 to 80 liters (8 to 21 gallons) of fuel. Preventive application: Add to the fuel at every inspection. Problem solver: Add to fuel to cure acute engine problems. Appli­ca­tion: Fill directly into the fuel tank. For preventive use at every inspection / once a year, for existing fuel system problems and after fuel system repairs. The product mixes automatically with the fuel and can therefore be added at any time. One full Can (500 ml) used with 30 to 80 liters (8 to 21 gallons) of fuel.

Descripcion: Pro-Line Engine Flush

Marca: LIQUI MOLY

Contenido: 500 ML

Caja: 6

Descripcion: Radiator Cleaner

Marca: LIQUI MOLY

Contenido: 300 ML

Caja: 12

Especificaciones / Aprobación: Removes deposits in cooling systems of all water cooled engines. It removes scale, grease, sludge and other deposits to allow restored performance and proper cooling performance. Suitable for all coolant and heating systems (exception: Low Conductivity-coolants). Does not contain aggressive acids or alkalis and is acid neutralising. Contents (300 ml) is sufficient for 4–10 Liters (1 gal. to 2.6 gal.) coolant water. Appli­ca­tion: Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according to the manufacturers instructions. Contents (300 ml) is sufficient for 4–10 Liters (1 gal. to 2.6 gal.) coolant water.

Descripcion: Pro-Line Turbocharger Additive

Marca: LIQUI MOLY

Contenido: 20 G

Caja: 12

Especificaciones / Aprobación: Provides initial lubrication of new or replaced turbochargers to prevent damage due to oil starvation. Damage to turbocharger may occur within seconds of engine start if not lubricated properly. Pro-Line Turbocharger additive will provide needed protection and allow proper break-in of new units which prevents additional repairs. For all 4-stroke gasoline and diesel engines. Miscible with most commercially available motor oils. Safe for use with catalytic converters and particulate filters (GPF/DPF). Appli­ca­tion: The oil intake passage of the turbocharger is filled to the brim with Pro-Line Turbocharger Additive before the oil supply line is connected.

Descripcion: DIJectron

Marca: LIQUI MOLY

Contenido: 300 ML

Caja: 12

Especificaciones / Aprobación: The unique combination of proven PEA technology and the latest additive generation achieves maximum cleaning performance in the combustion chamber, in and around the injector tip and in the entire fuel system. Furthermore, DIJectron stops the formation of new deposits so that complex injector systems always work at the highest efficiency. Regular use of DIJectron significantly reduces the risk of engine damage caused by Low Speed Pre Ignition (LSPI), optimizes exhaust gas emissions and protects the fuel system from corrosion. LIQUI MOLY recommends DIJectron particularly for modern 4-stroke gasoline direct injection (GDI) engines. Contents (300 ml) is sufficient for 40–70 Liters (10.5 gal. to 18 gal.) of fuel. Appli­ca­tion: Contents (300 ml) is sufficient for 40–70 Liters (10.5 gal. to 18 gal.) of fuel. For the best results and long term effect add DIJectron to the fuel tank every 4.000 km (2400 miles).

Descripcion: Urea (Universal)

Marca: FEBI

Contenido: 10 L

Caja: 1

Especificaciones / Aprobación: ­AdBlue / ­AUS32 / ­DIN 70070 / ­ISO 22241

Descripcion: Gasket Remover

Marca: VICTOR REINZ

Contenido: 300 ML

Caja: 12

Especificaciones / Aprobación: Spraycan

Descripcion: DPF-Probe With 5 Inter­change­able Tips

Marca: LIQUI MOLY

Contenido: 1

Caja: 1

Especificaciones / Aprobación: Specially developed probe with 5 different adjustable and articulating tips made from stainless steel for application of Pro-Line Diesel Particulate Filter Cleaner and Pro-Line Diesel Particulate Filter Purge. The probe has a flexible hose connection with a lenght of 1 m (39,4") that fits the DPF Pressurized Tank Spray Gun (part no. 7946). Depending on the type of vehicle, enables ideal access for cleaning passenger car diesel particulate filters (DPF/FAP) when installed. Appli­ca­tion: Use with DPF spray gun for accessing DPF units on vehicle. 5 Interchangeable nozzles allow for use on almost any vehicle and particle filter location. The extra long wand allows cleaning of normally unreachable particle filters.

Descripcion: DPF Pres­sur­ized Tank Spray Gun

Marca: LIQUI MOLY

Contenido: 1

Caja: 1

Especificaciones / Aprobación: The Spray-Gun is powder coated for protection and equipped with a non-return pressure valve. It comes supplied with a European style hose coupling. Reservoir size is 1 liter (34 FL OZ). The built-in manual flow valve allows precise control of spray volume. The Liqui Moly spray gun design provides a finely atomized spray pattern for a more efficient DPF cleaning. Designed for use together with Liqui Moly DPF-Probe (LM7945) and when applying Pro-Line Diesel Particulate Filter Cleaner and Pro-Line Diesel Particulate Filter Purge. Operating air pressure is 6-8 bar (90 - 120 psi). Appli­ca­tion: Designed for use together with Liqui Moly DPF-Probe (LM7945) and when applying Pro-Line Diesel Particulate Filter Cleaner and Pro-Line Diesel Particulate Filter Purge. Other infor­ma­tion: CAUTION: Always depressurize and drain after each use and before storing.

Descripcion: Mounting Paste

Marca: TEXTAR

Contenido: 75 ML

Caja: 36

Especificaciones / Aprobación: Not metalliferous

Descripcion: Mounting Paste

Marca: TEXTAR

Contenido: 180 ML

Caja: 10

Especificaciones / Aprobación: Does not contain mineral oil