LUBRICANTES Y ADITIVOS

Descripcion: LM 48 Instal­la­tion Paste

Marca: LIQUI MOLY

Contenido: 50 G

Caja: 12

Especificaciones / Aprobación: Is used for assembly of engines, gearboxes, industrial machinery or for press fitting etc. Very adherent on polished surfaces. Use on engine bearings, piston skirts, camshaft lobes etc. Prevents dry-run damage at start-up. Allows easy assembly of tight-fitting parts. Provides protection from scoring during press fit. Uses a synergistically active and unique solid lubricant system of zinc sulfide, graphite, fluorides and tungsten disulfide. Service temperature: -35 °C to +450 °C (–31 °F to +842 °F). Suitable for assembly of engines, gearboxes (dry clutch only), industrial machinery, when press fitting etc. Appli­ca­tion: Apply an appropriate amount to the cleaned surfaces with a paint brush or lint-free cloth.

Descripcion: Brake Anti-Squeal Paste

Marca: LIQUI MOLY

Contenido: 200 ML

Caja: 6

Especificaciones / Aprobación: A synthetic based specialty with a solid agent to prevent and eliminate noise from brake pads. It is extremely adhesive and high temperature resistant, it resists road salt and water wash-out. With excellent corrosion protection and particularly suited for use with aluminum and magnesium materials as well as on vehicles with ABS/ESP systems. Application range -40 °C to +1200 °C (-104 °F to +2.192 °F). Suitable for use in most common disk brake systems. Must never be applied to the friction surface of the brake disc / brake pads. Appli­ca­tion: Clean the surfaces thoroughly before use and then apply to the back of the brake pad and to the contact surfaces and fasteners. Do not apply on friction surfaces! Other infor­ma­tion: Do not under any circumstances allow Brake Anti-Squeal Paste to get onto the friction surface of the brake lining or the brake disc.

Descripcion: Ceramic Paste

Marca: LIQUI MOLY

Contenido: 200 ML

Caja: 6

Especificaciones / Aprobación: A modern, multifunctional formulation that can be used in a variety of applications. Thanks to its high adhesion and high temperature resistance it can be used as a release agent, to prevent seizing, cold welding, rust freezing and stick-slip. Metal-free and non-conductive. Suitable for use with aluminum and magnesium materials. Application range –40?°C to +1.400?°C (–104 °F to + 2.552 °F). Use when high temp and/or anti-seize lubrication is needed or general lubrication of threaded fasteners. Appli­ca­tion: Clean the surfaces thoroughly before use.

Descripcion: Mounting Paste

Marca: TEXTAR

Contenido: 75 ML

Caja: 36

Especificaciones / Aprobación: Not metalliferous

Descripcion: Mounting Paste

Marca: TEXTAR

Contenido: 180 ML

Caja: 10

Especificaciones / Aprobación: Does not contain mineral oil

Descripcion: Mounting Paste

Marca: TEXTAR

Contenido: 75 ML

Caja: 36

Especificaciones / Aprobación: Does not contain mineral oil