LUBRICANTES Y ADITIVOS

Descripcion: Radiator Stop Leak

Marca: LIQUI MOLY

Contenido: 250 ML

Caja: 12

Especificaciones / Aprobación: Will immediately seal small leaks caused by external damage, porous solder joints and hairline cracks in cooling systems of all water cooled engines. Coolant is prevented from entering the combustion chamber due to internal leaks from head gasket etc. It does not react with oxygen or heat and will never prevent system flow or cause overheating. Radiator Stop Leak works as long as it’s in the coolant. For any water based cooling system with or without filters (exception: Low Conductivity-coolants). Safe to use with aluminum and plastic radiators. Contents (250 ml) is sufficient for 10 Liters (2.6 gal.) coolant. Compatible with most types of coolant or anti-freeze. May be used as a preventive. Appli­ca­tion: Shake well before use. Add contents to the cold cooling system. Start up the heater. Then drive the vehicle for at least 10 minutes. Contents (250 ml) is sufficient for 10 Liters (2.6 gal.) coolant.

Descripcion: Motor Oil Saber

Marca: LIQUI MOLY

Contenido: 300 ML

Caja: 12

Especificaciones / Aprobación: Maintains and regenerates rubber and plastic seals in the engine oil circuit of gas and diesel engines. Oil consumption due to aged and hardened valve stem seals is reduced. No more blue exhaust smoke, improved emissions. External leaks are minimized or even eliminated. Dampens engine noise and reduces repair costs. Reduces pollution and improves the environment. Use in 4-stroke gas and diesel engines, with or without turbochargers. Miscible with most commercially available motor oils. Safe for use with catalytic converters and particulate filters (GPF/DPF). Not suitable for use with wet clutches! One full can (300 ml) used with 3–5 Liters (3.2 to 5.3 U.S. Qts) of motor oil. The product can be added at any time, sealing first takes effect after about 600-800 km (400-500 miles). Appli­ca­tion: One full can (300 ml) used with 3–5 Liters (3.2 to 5.3 U.S. Qts) of motor oil. The product is self mixing and can be added at any time, sealing first takes effect after about 600-800 km (400-500 miles). The use of Motor Oil Saver every around 30.000 Km (20.000 miles) is recommended to guarantee a lasting effect. Other infor­ma­tion: Not suitable for use in motorcycles with wet clutches!

Descripcion: Power Steering Oil Leak Stop

Marca: LIQUI MOLY

Contenido: 35 ML

Caja: 12

Especificaciones / Aprobación: Keeps rubber and plastic seals in hydraulic power steering systems soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow, reduces noise levels and extends service life while reducing repair costs. Suitable for steering gears that are filled with Dexron II, Dexron III, Dexron VI or central hydraulic system oils. Add to the compensating reservoir of the steering system. One full tube (35 ml) used with up to 1 liter (1.1 U.S. Qts) of steering fluid. Appli­ca­tion: Add to the compensating reservoir of the steering system. One full tube (35 ml) used with up to 1 liter (1.1 U.S. Qts) of steering fluid.