cargando por favor espere
Restablecer la contraseña / Crear una cuenta
ventas@bmppartes.com
246 resultados encontrados
Cantidad máxima permitida: 5000
Descripcion: Hydraulic Lifter Additive
Marca: LIQUI MOLY
Contenido: 300 ML
Caja: 12
Especificaciones / Aprobación: Prevents and reduces hydraulic lifter noise. Cleans oil passages to remove oil flow restrictions. Restores proper hydraulic lifter function and reduces wear. For all 4-stroke gasoline and diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF/DPF). Compatible with most commercially available motor oils and belt-in-oil systems. One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. Not suitable for motorcycles with wet clutches. Application: One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. The product is self-mixing and can be added at any time. Shake well before use. For best results, use with every oil change. Other information: Not suitable for use on motorbikes with wet clutches.
En stock
Consultar stock adicional
Descripcion: Valve Clean
Contenido: 150 ML
Especificaciones / Aprobación: A combination of active agents, specifically developed to clean and maintain intake valves and the combustion chamber of port- and multi-port fuel injected engines. Restores engine efficiency and protects against corrosion in the fuel system. Suitable for use in all 4-stroke gasoline engines with port- and multi-port fuel injection, with or w/o turbochargers. Safe for use with catalytic converters and particulate filters (GPF). One full can (150 ml) used with 25–75 Liters (7 gal. to 20 gal.) of fuel. Application. For best results, use Valve Clean regularly. One full can (150 ml) used with 25–75 Liters (7 gal. to 20 gal.) of fuel.
Descripcion: Hypoid Gear Oil (GL5) SAE 85W-90
Contenido: 1 L
Caja: 6
Especificaciones / Aprobación: Mineral based gear oil provides accurate function and protection at any temperature even during high torque loads. Consistent viscosity and multifunctional EP additives guarantee a strong lubricating film for maximum wear protection. Universal use in gearboxes, hypoid axles and differentials without an integrated differential lock system (wet clutch) where a gear oil meeting current product specification is required or recommended. Observe the manufacturers instructions!
Descripcion: High Performance Gear Oil (GL4+) SAE 75W-90
Especificaciones / Aprobación: Fully synthetic high-performance transmission fluid. Offers high shear stability combined with correct friction behavior and excellent wear protection. Outstanding resistance to viscosity breakdown provides superior shift performance in all operating conditions. Suitable for a variety of manual transmissions. Universal use in modern gearboxes where a gear oil meeting current product specification is required or recommended. Observe the manufacturers instructions!
Llame para verificar disponibilidad
Descripcion: Gear Oil (GL4) SAE 85W-90
Especificaciones / Aprobación: Mineral based transmission oil provides accurate function at any temperature even during high torque loads. Consistent viscosity guarantees a strong lubricating film for maximum wear protection. Enables easy shifting and smooth gear engagement. Universal use in gearboxes, hypoid axles and differentials without an integrated differential lock system (wet clutch) where a gear oil meeting current specifications is required or recommended. Observe the manufacturers instructions!
Descripcion: Super Diesel Additive
Especificaciones / Aprobación: A combination of additives to clean and maintain the diesel fuel system. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions. Regular use keeps the fuel system in perfect working order. Suitable for use in all diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (DPF). Suitable for use with HVO / XTL Diesel fuel. For best results add Super Diesel Additive every 2,000 km (1,200 miles) to fuel. Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. Application: For best results and long-term effect add Super Diesel Additive every 2,000 km (1,200 miles). Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel.
Descripcion: Long-Life Grease + MoS2
Contenido: 100 G
Especificaciones / Aprobación: A high-performance grease suitable for a wide range of applications in all motor vehicles and for general machine lubrication. Thanks to added MoS2 it provides excellent protection during extreme loads and high heat while providing excellent dry-run properties. Designed as a CV-joint lubricant it's also recommended for high-load bearings and joints, splined shafts, threads, guides, and constant velocity drive joints. The added MoS2 gives the grease its grey color. Suitable for a wide application range in all motor vehicles and for general machine lubrication. Not suitable for high speed bearings such as wheel bearings. Application: As usual for grease. Observe the instructions of the bearing and machine manufacturers!
Descripcion: Top Tec 4200 SAE 5W-30 New Generation
Especificaciones / Aprobación: ACEA C3, API SQ, BMW Longlife-04, MB-Approval 229.31/229.51/229.52, Opel OV 040 1547 - G30 / OV 040 1547 - D30, Porsche C30, VW 504 00/507 00. ACEA C2, BMW Longlife-01 (up to 2018)*, BMW Longlife-01 FE (up to 2018)*, Fiat 9.55535-S1, Fiat 9.55535-S3, GWM, HAVAL, VW 500 00, VW 501 01, VW 502 00, VW 503 00, VW 503 01, VW 505 00, VW 505 01, VW 506 00, VW 506 01 (With the exception of R5 and V10 TDI engines before 6/2006), Wuling
Descripcion: ATF Additive
Contenido: 250 ML
Especificaciones / Aprobación: Keeps rubber and plastic seals in automatic transmissions soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow while restoring the oils performance. Reduces noise and improves shift performance in automatic transmissions. Extends usable transmission life. For all automatic transmissions that are filled with Dexron II and Dexron III based fluids. One full tube (250 ml) used with 4–8 Liters (4.2 to 8.5 U.S. Qts) of ATF fluid. Application: Mix ATF Additive into the gear oil using the dipstick. One full tube (250 ml) used with 4–8 Liters (4.2 to 8.5 U.S. Qts) of ATF fluid.
Descripcion: Fully Synthetic Hypoid Gear Oil (GL5) LS SAE 75W-140
Especificaciones / Aprobación: Fully synthetic hypoid gear oil, developed for use in final drives with or without wet clutch-based differentials (Limited Slip). Stable viscosity and multifunctional EP additives guarantee maximum wear protection even under extreme operating conditions. Exceeds the high requirements of well-known vehicle manufacturers and recommended for any hi-load transmission or differential in race and track vehicles or whenever added protection is needed. Universal use in high-performance gearboxes, hypoid axles and differentials with and without an integrated differential lock system (wet clutch), particularly suitable for numerous BMW vehicles as well as for transmissions from other manufacturers where a gear oil meeting product specification is required or recommended. Observe the manufacturers instructions!
Descripcion: Diesel Purge
Contenido: 500 ML
Especificaciones / Aprobación: Developed for cleaning fuel systems and injectors within minutes and restore lost power caused by deposits. Ideally Diesel Purge is added into the fuel filter housing. It will eliminate knocking, pinging and exhaust smoke. Improves start up performance. Suitable for use in all diesel engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (DPF). Suitable for use with HVO / XTL Diesel fuel. Preventive use: Fill the fuel filter up with Diesel Purge when doing filter replacement, put the rest in tank. In case of problems run the engine directly with Diesel Purge through fuel line or diesel filter. Application: Preventive use Fill the fuel filter up with Diesel Purge when doing filter replacement, put the rest in tank. Remedial use Unclip the fuel pipe and immerse the end in the Diesel Purge. Close the fuel return pipe or feed that into the Diesel Purge. Start the engine and allow the engine to run at different speeds with the Diesel Purge unmixed. After the cleaning process, assemble the vehicle's system. In extreme cases, repeat the cleaning procedure if necessary.
Descripcion: Jectron Fuel Injection Cleaner
Especificaciones / Aprobación: A combination of additives to clean and maintain the fuel system of port injected and carbureted gasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine efficiency. Regular use keeps the fuel system in perfect working order. Suitable for use in all 4-stroke gasoline engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF). Add the contents to the fuel tank and repeat every 2,000 km (1,200 miles) or as necessary. Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. Application: Contents (300 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. Regular use keeps injection system in perfect working order and gives lowest exhaust emissions. Smoother idling, better throttle response. Injection Cleaner can be mixed with fuel at any time since mixing is spontaneous.
Descripcion: MoS2 Anti-Friction Engine Treatment
Especificaciones / Aprobación: MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine life and less noise. Specifically designed for older engine designs with or without a turbocharger. For all 4-stroke gasoline and diesel engines, with or w/o turbochargers. Compatible with most commercially available motor oils and in oil running belt. Safe for use with catalytic converters and particulate filters (GPF/DPF). One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. Shake well before use. Application: One full can (300 ml) used with 3–6 Liters (3.2 to 6.4 U.S. Qts) of motor oil. The product is self-mixing and can be added at any time. Shake well before use. For best protection, use with every oil change.
Contenido: 5 L
Caja: 4
Descripcion: Pro-Line Diesel Particulate Filter Cleaner
No se encontraron piezas coincidentes.
Por favor, ajuste su búsqueda O borre los filtros.
