cargando por favor espere
Restablecer la contraseña / Crear una cuenta
ventas@bmppartes.com
246 resultados encontrados
Cantidad máxima permitida: 5000
Descripcion: LM 48 Installation Paste
Marca: LIQUI MOLY
Contenido: 50 G
Caja: 12
Especificaciones / Aprobación: Is used for assembly of engines, gearboxes, industrial machinery or for press fitting etc. Very adherent on polished surfaces. Use on engine bearings, piston skirts, camshaft lobes etc. Prevents dry-run damage at start-up. Allows easy assembly of tight-fitting parts. Provides protection from scoring during press fit. Uses a synergistically active and unique solid lubricant system of zinc sulfide, graphite, fluorides and tungsten disulfide. Service temperature: -35 °C to +450 °C (–31 °F to +842 °F). Suitable for assembly of engines, gearboxes (dry clutch only), industrial machinery, when press fitting etc. Application: Apply an appropriate amount to the cleaned surfaces with a paint brush or lint-free cloth.
Llame para verificar disponibilidad
Consultar stock adicional
Descripcion: Pro-Line Automatic Transmission Cleaner
Contenido: 1 L
Caja: 6
Especificaciones / Aprobación: A highly effective formulation developed for safe internal cleaning of automatic transmissions during maintenance service. Eliminates problems and restores proper shifting performance in automatic transmissions. Allows the fresh oil to immediately develop full performance. Maintains operating efficiency, smooth shifting and overall behavior while maximizing longevity. Suitable for most automatic transmission fluids. Use with suitable automatic transmission flush equipment will guarantee best product performance and proper servicing. For professional use only. Application: At operating temperature, add sufficient amount of Pro-Line Automatic Transmission Cleaner to existing fluid. With drive wheels in the air, start the engine and let it idle for 10 to 15 minutes. During this time, shift through all gears once or twice. Stop the engine, change the oil and replace filter according to the manufacturer's instructions. 100 ml used with 2 - 3 Liters (2.1 to 3.2 U.S. Qts) of transmission fluid.
En stock
Descripcion: Molygen New Generation SAE 5W-30
Especificaciones / Aprobación: API SQ, ILSAC GF-7A. Chrysler, Chrysler MS-6395, Daihatsu, Fiat 9.55535-CR1, Ford, Ford WSS-M2C 946-A, Ford WSS-M2C 946-B1, Ford WSS-M2C 961-A1, GM 6094 M, GM dexos1 Gen 3, GWM, HAVAL, Honda, Hyundai, Isuzu, Kia, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota, Wuling
Contenido: 5 L
Caja: 4
Descripcion: Molygen New Generation SAE 5W-40
Especificaciones / Aprobación: ACEA A3, ACEA B4, API SN, BMW Longlife-01 (up to 2018), Fiat 9.55535-H2, Fiat 9.55535-N2, Fiat 9.55535-Z2, GWM, HAVAL, MB 229.5, Opel GM-LL-B-025, Porsche A40, Renault RN 0700, Renault RN 0710, VW 502 00, VW 505 00
Descripcion: Speed Tec Gasoline
Contenido: 250 ML
Especificaciones / Aprobación: High-tech fuel additive, developed specifically for improved throttle response under partial engine load. Optimizes fuel atomization and combustion, cleans fuel system while providing maximum engine performance and efficiency. Suitable for use in all 4- and 2-stroke gasoline engines, with or without turbochargers. Safe for use with catalytic converters and particulate filters (GPF). Contents (250 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. For consistent use when refueling. Application: Contents (250 ml) is sufficient for 25–75 Liters (7 gal. to 20 gal.) fuel. For consistent use when refueling. Can be mixed with the fuel at any time.
Descripcion: Top Tec 6200 SAE 0W-20
Especificaciones / Aprobación: ACEA C5, Ford WSS-M2C 956-A1, Porsche C20, VW 508 00, VW 509 00
Descripcion: Synthoil Race Tech GT1 SAE 10W-60
Especificaciones / Aprobación: ACEA A3, ACEA B4, API SN. Fiat 9.55535-H3
Descripcion: Brake Anti-Squeal Paste
Contenido: 200 ML
Especificaciones / Aprobación: A synthetic based specialty with a solid agent to prevent and eliminate noise from brake pads. It is extremely adhesive and high temperature resistant, it resists road salt and water wash-out. With excellent corrosion protection and particularly suited for use with aluminum and magnesium materials as well as on vehicles with ABS/ESP systems. Application range -40 °C to +1200 °C (-104 °F to +2.192 °F). Suitable for use in most common disk brake systems. Must never be applied to the friction surface of the brake disc / brake pads. Application: Clean the surfaces thoroughly before use and then apply to the back of the brake pad and to the contact surfaces and fasteners. Do not apply on friction surfaces! Other information: Do not under any circumstances allow Brake Anti-Squeal Paste to get onto the friction surface of the brake lining or the brake disc.
Descripcion: Ceramic Paste
Especificaciones / Aprobación: A modern, multifunctional formulation that can be used in a variety of applications. Thanks to its high adhesion and high temperature resistance it can be used as a release agent, to prevent seizing, cold welding, rust freezing and stick-slip. Metal-free and non-conductive. Suitable for use with aluminum and magnesium materials. Application range –40?°C to +1.400?°C (–104 °F to + 2.552 °F). Use when high temp and/or anti-seize lubrication is needed or general lubrication of threaded fasteners. Application: Clean the surfaces thoroughly before use.
Descripcion: Battery Clamp Grease
Especificaciones / Aprobación: Protects battery terminals and electrical contacts from corrosion and oxidation. It is compatible with most plastics, ensures safe starting, bright light and longer battery life. Prevents acid damage, leakage current and contact resistance. Certification: DIN 51502 K2G-30. Service temperature: –30 °C to +100 °C (-22 °F to +212 °F). Use on battery terminals and connectors along with terminal connectors in vehicle electronics. Application: Clean contaminated components and treat with Battery Clamp Grease.
Descripcion: Multipurpose Grease
Contenido: 400 G
Especificaciones / Aprobación: High performance Multipurpose Grease for use in a wide range of applications in motor vehicles and general machine lubrication. Carefully selected ingredients offer good corrosion protection, ensures long-term lubrication in damp and dusty environments. Resists cold and hot water washout. Certification: DIN 51502 K2K-20. Service temperature: –25 °C to +120 °C (-13 °F to +248 °F). Intermittent up to +130 °C (+266 °F). Suitable for a wide application range in all motor vehicles and for general machine lubrication. Application: As usual for grease. The operating instructions of the bearing and machine manufacturers must be followed.
Descripcion: LM 50 Litho HT
Especificaciones / Aprobación: High performance grease used in a wide range of applications in motor vehicles. Specifically recommended for fast spinning bearings with high load such as wheel bearings. Provides excellent wear protection and high-pressure absorbance capacity. Certification: DIN 51502 KP2N-30. Service temperature: –30 °C to +140 °C (–22 °F to +284 °F). Intermittent up to +180 °C (+356 °F). Suitable for a wide application range in all motor vehicles, specifically suitable for fast spinning bearings with high load such as wheel bearings. Application: Before treating with LM 50 Litho HT, the components must be clean and free from residues such as lubricants, dirt and moisture. Full performance is only realised when used alone.
No se encontraron piezas coincidentes.
Por favor, ajuste su búsqueda O borre los filtros.
